Free paint calculator

Paint Calculator

Enter the room size in feet, the doors and windows, the paint type and the number of coats — and get the litres to buy, the primer, the putty and the cost from your own per-litre prices.

✓ Free to use ✓ No signup ✓ Browser calculation
7.50 litres to buy for the 12 × 14 ft sample room On the sample: 6.70 litres exact at premium coverage, plus 10% wastage — two 4-litre tins
5 paint types, 1 formula Economy to texture, 70–160 sq ft/L — midpoints as planning defaults, bands printed on the page
Checked 14 November 2026 aapkapainter, onsiteteams, calculatorking, bttotek and dailytools — see the methodology at the foot of the page

Coverage is a planning estimate, not a promise. Coverage is a planning estimate — real use depends on the wall, the colour change and the tin's own rate. No paint price is printed here as fact: the cost comes only from the per-litre prices you enter.

How much paint do I need?

The calculator uses the band midpoint. Check the tin — rough walls need the low end.

Ceiling height, in feet.

2 coats is standard; 3 for a dark-to-light change.

21 sq ft deducted per door.

13 sq ft deducted per window.

Fresh plaster takes 2 coats of primer and putty; a repaint takes 1 coat of primer.

From the tin or the shop. Leave blank for no cost line.

Putty is only counted for fresh plaster. No price is ever printed here as fact.

BUY 7.5 LITRES

BUY 7.5 LITRES

452 SQ FT · PREMIUM EMULSION · 2 COATS

7.5 litres

7.5 litres paint to buy

Net paintable area
452 sq ft
Finish paint (exact)
6.70 litres (Premium Emulsion, 135 sq ft/L)
Buy
7.50 litres — 2 × 4 L
Tins to buy
2 × 4 L (8 L)
Primer
2.71 litres (1 coat) — buy 3.00 litres
Wall putty
0 kg — not needed for a repaint
Estimated cost
Enter a price per litre to see the cost

A 12 × 14 ft room needs 6.70 litres of premium emulsion

On whole room — all four walls, 452 sq ft net takes 6.70 litres of premium emulsion for 2 coats — buy 7.50 litres (2 × 4 L), plus 2.71 litres of primer and no putty.

Buy 7.50 litres (2 × 4 L) for 452 sq ft. The exact figure is 6.70 litres — the extra is the 10% wastage allowance, rounded up to the nearest 0.5 L.

520 sq ft gross − 68 sq ft openings = 452 sq ft net. 452 sq ft × 2 ÷ 135 = 6.70 litres exact; +10% = 7.37 litres; buy 7.50 litres.
Primer: 452 sq ft ÷ 175 × 1 × 1.05 = 2.71 litres (1 coat, buy 3.00 litres). Putty: 0 kg — a repaint in good condition does not usually need putty.

A planning estimate, not a quotation. Real use depends on wall roughness, porosity, colour change and the tin's own rate — read the notes below before trusting the figure.

LineAmountHow it is worked out
Gross wall area520 sq ft2 × (12 + 14) × 10
Less: doors− 42 sq ft2 × 21 sq ft
Less: windows− 26 sq ft2 × 13 sq ft
Net paintable area452 sq ftWhat the paint has to cover
Finish paint, exact6.70 litres452 × 2 ÷ 135 sq ft/L
Wastage (+10%)0.67 litresRoller, brush and touch-ups
Buy figure7.50 litresRounded up to the nearest 0.5 L
Tins to buy2 × 4 L (8 L)20, 10, 4 and 1 litre packs
Primer (1 coat)2.71 litres452 ÷ 175 × 1.05 — buy 3.00 litres
Wall putty0 kgNot usually needed for a repaint in good condition
Buy7.50 litresTwo 4-litre tins
  • Ceiling not included — tick “Include ceiling” to add the ceiling area (length × width).
  • Putty is 0 kg: a repaint in good condition does not usually need wall putty — allow for levelling patches if the wall needs them.
  • Coverage 135 sq ft/L is the midpoint of the 130–140 band — a planning default, not the tin's figure. Check the tin.
  • The buy figure includes 10% for wastage and touch-ups, rounded up to the nearest 0.5 L.

Figures as of 14 November 2026. Litres are to 2 decimal places. The method is the standard Indian estimate, with the coverage bands, primer and putty rates stated on this page.

Recent calculations

No calculations yet — work one out above.

The sample: a 12 × 14 ft master bedroom — buy 7.50 litres

The sample is a 12 × 14 ft master bedroom, 10 ft ceiling, 2 doors and 2 windows, premium emulsion, 2 coats, repaint in good condition, ceiling not included, no prices entered.

FigureAmountNote
Gross wall area 520 sq ft 2 × (12 + 14) × 10 ft.
Openings deducted − 68 sq ft 2 doors × 21 sq ft + 2 windows × 13 sq ft.
Net paintable area 452 sq ft What the paint has to cover.
Finish paint, exact 6.70 litres 452 × 2 ÷ 135 sq ft/L (premium midpoint).
Wastage (+10%) 0.67 litres Roller, brush and touch-ups.
Buy figure 7.50 litres Rounded up to the nearest 0.5 L — 2 × 4 L tins (8 L).
Primer (1 coat) 2.71 litres 452 ÷ 175 × 1.05 — buy 3.0 litres.
Wall putty 0 kg A repaint in good condition needs none.

What does a paint calculator do?

It works out how much paint a room needs from the wall area — not the floor area. Measure the room in feet, deduct the doors and windows, divide by the paint's coverage per litre and multiply by the number of coats, then add 10% for wastage and round up to the tins you can actually buy. It also works out the primer for one coat (two on fresh plaster) and the wall putty for fresh plaster, and the cost — but only from the per-litre prices you type in, because paint prices change by brand, city and month and no printed price stays true.

From the tape measure to the tins, in four steps

  1. Measure the room

    Length, width and ceiling height in feet — a tape measure, not a guess. A 12 × 14 ft room with a 10 ft ceiling has 520 sq ft of wall, not 168 sq ft of floor.

  2. Count the openings

    Doors count as 21 sq ft each and windows as 13 sq ft each — the standard Indian deduction sizes. Measure a large door or a picture window instead of using the standard size.

  3. Pick the paint, coats and surface

    Economy, premium, luxury, exterior or texture paint; 1 coat for a touch-up, 2 coats as standard, 3 for a dark-to-light colour change; fresh plaster or a repaint in good condition. Fresh plaster takes 2 coats of primer and putty; a repaint takes 1 coat of primer and no putty.

  4. Read the buy figure

    The exact litres, the 10% wastage line, the litres to buy rounded up to the nearest 0.5 L, and the tins — 20, 10, 4 and 1 litre — plus primer, putty and the cost if you entered prices. Buy the buy figure, not the exact litres.

How the paint is worked out

The method is the standard Indian estimate, checked against the five calculators India actually uses on 14 November 2026: net wall area is 2 × (length + width) × height, less 21 sq ft per door and 13 sq ft per window, plus the ceiling (length × width) if you tick it. Finish paint is net area × coats ÷ coverage, where coverage is the midpoint of the paint type's band (economy 115, premium 135, luxury 155, exterior 115, texture 80 sq ft/L). Then 10% is added for wastage and touch-ups and the total is rounded up to the nearest 0.5 L, and the tins are the fewest litres that cover it from 20, 10, 4 and 1 litre packs. Primer is net area ÷ 175 × coats × 1.05 — 150–200 sq ft/L at a 175 midpoint, with a 5% allowance — 1 coat for a repaint, 2 for fresh plaster. Putty is net area × 1.2 kg/m² in total for 2 coats (bttotek), fresh plaster only. Cost is buy litres × your price per litre, and putty kg × your price per kg — nothing is priced as fact.

Eleven rooms, eleven paint jobs

Eleven worked examples from the calculators India actually uses — each one reproduced exactly by this calculator, except where a difference is stated.

The sample: 12 × 14 ft master bedroom, 10 ft ceiling

A 12 × 14 ft master bedroom, 10 ft ceiling, 2 doors and 2 windows, premium emulsion, 2 coats, repaint. Gross wall area 520 sq ft, less 68 sq ft of openings, is 452 sq ft net. At the premium midpoint of 135 sq ft/L that is 452 × 2 ÷ 135 = 6.70 litres exact, 7.37 litres with the 10% allowance — buy 7.5 litres, two 4-litre tins. Primer is 2.71 litres for one coat; a repaint in good condition needs no putty.

452 sq ft net — 6.70 litres exact, buy 7.50 litres (2 × 4 L), primer 2.71 litres (buy 3.00 litres), putty 0 kg.

A 2 BHK repaint, room by room

A 700 sq ft 2 BHK has about 1,600 sq ft of net wall area, and aapkapainter puts it at 26.7 litres for two coats at 120 sq ft/L — but that is the whole flat, not one room. Run each room through the calculator and add the litres. The hall below is the biggest single room: 14 × 18 ft, 10 ft ceiling, 2 doors and 3 windows, premium emulsion, 2 coats.

559 sq ft net — 8.28 litres exact, buy 9.50 litres (1 × 10 L), primer 3.35 litres (buy 3.50 litres), putty 0 kg.

A 3 BHK fresh plaster job, with primer and putty

A 1,000 sq ft 3 BHK has about 2,200 sq ft of net wall area, and aapkapainter puts it at 36.7 litres for two coats at 120 sq ft/L. Fresh plaster needs the full sequence: 2 coats of putty, then primer, then the finish. The master bedroom below is 15 × 12 ft, 10 ft ceiling, 2 doors and 3 windows, premium emulsion, 2 coats, fresh plaster — with prices entered (₹320 a litre for paint, the rate in bttotek's worked example).

459 sq ft net — 6.80 litres exact, buy 7.50 litres (2 × 4 L), primer 5.51 litres (buy 6.00 litres), putty 51.2 kg, estimated cost ₹4,580.00.

One accent wall in the living room

One wall only — the 14 ft length wall, 10 ft high, with a door in it. The calculator's “one wall” scope counts that wall alone (14 × 10 ft, less the 21 sq ft door), so the buy figure is 2.0 litres — two 1-litre tins.

119 sq ft net — 1.76 litres exact, buy 2.00 litres (2 × 1 L), primer 0.71 litres (buy 1.00 litres), putty 0 kg.

An exterior wall, 30 × 25 ft

The outside of a 30 × 25 ft face, 12 ft high, 2 doors and 6 windows, exterior emulsion, 2 coats, fresh plaster. Onsiteteams works the same shape (1,206 sq ft after deductions) to about 23 litres with 15% wastage; this calculator gives 23.0 litres to buy with its 10% allowance — the difference is the wastage rate, stated on the page.

1,200 sq ft net — 20.87 litres exact, buy 23.00 litres (1 × 20 L + 3 × 1 L), primer 14.40 litres (buy 14.50 litres), putty 133.8 kg.

A small bathroom repaint

A 5 × 7 ft bathroom, 9 ft ceiling, one door and no windows, premium emulsion, 2 coats. The buy figure is 3.5 litres — one 4-litre tin, with half a litre left for touch-ups.

195 sq ft net — 2.89 litres exact, buy 3.50 litres (1 × 4 L), primer 1.17 litres (buy 1.50 litres), putty 0 kg.

A kitchen repaint on a budget

A 9 × 10 ft kitchen, 9 ft ceiling, one door and one window, economy emulsion, 2 coats, with prices entered (₹200 a litre for paint, ₹150 for primer). The paint alone is ₹1,200 — the whole job, primer included, is ₹1,500.

308 sq ft net — 5.36 litres exact, buy 6.00 litres (1 × 4 L + 2 × 1 L), primer 1.85 litres (buy 2.00 litres), putty 0 kg, estimated cost ₹1,500.00.

Ceiling only, for a 12 × 14 ft room

Ceilings take the floor area: 12 × 14 ft is 168 sq ft, and at economy coverage for two coats that is 2.92 litres exact — buy 3.5 litres, one 4-litre tin. Aapkapainter's own ceiling example is the same room at 130 sq ft/L for one coat: 1.3 litres.

168 sq ft net — 2.92 litres exact, buy 3.50 litres (1 × 4 L), primer 1.01 litres (buy 1.50 litres), putty 0 kg.

Dark to light — three coats

Going from a dark shade to a light one needs a third coat for full opacity (aapkapainter, onsiteteams). A 12 × 12 ft room, 10 ft ceiling, 2 doors and 2 windows, premium emulsion, 3 coats: 9.16 litres exact, 10.5 litres to buy.

412 sq ft net — 9.16 litres exact, buy 10.50 litres (1 × 10 L + 1 × 1 L), primer 2.47 litres (buy 2.50 litres), putty 0 kg.

The master bedroom from aapkapainter's table

Aapkapainter's room table lists this 12 × 14 ft room, 9 ft ceiling, at 420 sq ft of wall and 7.0 litres for two coats at 120 sq ft/L. This calculator, with 2 doors and 2 windows deducted at 21 and 13 sq ft and luxury coverage at its 155 midpoint, gives 400 sq ft net and 5.16 litres. The table's 420 sq ft does not reproduce from its own stated deductions (468 − 48 has no 21/13 combination), and its 120 rate is the practical figure while the calculator's 155 is the band midpoint — both differences are stated on the page, and the table's own litres (420 × 2 ÷ 120 = 7.0) reproduce exactly.

400 sq ft net — 5.16 litres exact, buy 6.00 litres (1 × 4 L + 2 × 1 L), primer 2.40 litres (buy 2.50 litres), putty 0 kg.

A small bedroom on economy emulsion

A 10 × 10 ft bedroom, 9 ft ceiling, one door and three windows, economy emulsion, 2 coats, repaint. Aapkapainter's table lists the same room at 300 sq ft of wall and 5.0 litres at 120 sq ft/L — and this calculator's net area for those exact openings is 300 sq ft too (360 − 21 − 39), so the wall area agrees; only the rate differs (115 midpoint here, 120 there).

300 sq ft net — 5.22 litres exact, buy 6.00 litres (1 × 4 L + 2 × 1 L), primer 1.80 litres (buy 2.00 litres), putty 0 kg.

Paint coverage rates — what each paint covers

The bands are onsiteteams' table, which is also where the calculator's midpoints come from. The other sources print different figures — aapkapainter's practical bands are lower, and dailytools prints its bands in sq m/L — so the table shows the disagreement instead of hiding it. Midpoints are planning defaults; check the tin.

Paint / materialCoverage band (1 coat)Midpoint usedPer 1,000 sq ft (2 coats)Typical use
Economy Emulsion 110–120 sq ft/L 115 ~17–18 L Budget repaints, rental properties
Premium Emulsion 130–140 sq ft/L 135 ~14–15 L Homes, standard finish
Luxury / Sheen 150–160 sq ft/L 155 ~13 L High-end finish, showrooms
Exterior Emulsion 110–120 sq ft/L 115 ~17–18 L Outside walls
Texture Paint 70–90 sq ft/L 80 ~22–28 L Feature walls, designer finishes
Wall Primer (1 coat) 150–200 sq ft/L 175 ~6 L 1 coat repaint, 2 coats fresh plaster
Wall Putty (2 coats) 1.2 kg/m² in total 1.2 kg/m² ~111.5 kg Fresh plaster only

Every line on the sample, and how it is worked out

Each line on the sample — the 12 × 14 ft master bedroom — with the rule behind it. The coverage line is the one that surprises people: it is a band midpoint, not the tin's figure, and the sources disagree about it.

FactorHow it is worked outTypicalOn the sample
Room size Perimeter × height: 2 × (12 + 14) × 10 300–640 sq ft for one room 520 sq ft of gross wall
Openings deducted Doors × 21 sq ft + windows × 13 sq ft 40–80 sq ft a room 68 sq ft (2 doors, 2 windows)
Net paintable area Gross wall − openings (+ ceiling if ticked) 200–600 sq ft a room 452 sq ft
Finish paint, exact Net area × coats ÷ coverage (premium midpoint 135) 3–9 litres a room, 2 coats 6.70 litres (452 × 2 ÷ 135)
Wastage and buy figure +10% for wastage, rounded up to the nearest 0.5 L Buy is always above the exact litres 0.67 L wastage; buy 7.5 L — 2 × 4 L
Primer Net area ÷ 175 × coats × 1.05 (1 coat, repaint) 2–3 litres a room, 1 coat 2.71 litres; buy 3.0 L
Wall putty Net area × 1.2 kg/m² for 2 coats — fresh plaster only 35–135 kg a room, fresh plaster 0 kg (a repaint needs none)

The rules behind the answer

Seven rules, each one checkable against the sources. Nothing here is a guess — and where the sources disagree, the page says so.

Litres = net area ÷ coverage × coats

The standard formula on all five sources: aapkapainter's worked example is 500 sq ft ÷ 130 × 2 = 7.7 litres, and bttotek's is (100 sq m × 2) ÷ 10 = 20.0 litres. Calculatorking folds the coats into the area instead (2 × (5 + 4) × 3 × 2 = 108 sq m, ÷ 10 = 10.8 litres) — same arithmetic, different order.

Net area is perimeter × height, less the openings

Gross wall area is 2 × (length + width) × height. Doors deduct 21 sq ft each and windows 13 sq ft each (aapkapainter; onsiteteams uses 12 sq ft per window, dailytools uses about 20 per door and 15 per window — the differences are small and stated). The ceiling adds length × width, only if you tick it. Measure large openings instead of using the standard sizes.

Coverage is a band, not a number

The calculator uses the midpoint of each band as a planning default — premium 135, not a claim that every premium paint covers 135. Aapkapainter's practical bands are lower (Royale 110–130, Tractor 105–120, Apex exterior 88–104) because they apply an 80% efficiency factor to the tin's stated rate for normal Indian walls. On rough or porous walls, use the low end of the band.

Add 10% before you buy, then round up

Rollers and brushes absorb paint, and a colour match later is never exact — so the buy figure is the exact litres plus 10%, rounded up to the nearest 0.5 L. Dailytools does the same: 490 sq ft, 2 coats at 120 gives 8.17 litres, 9 litres with 10%, bought as 2 × 4 L + 1 × 1 L. Buy the buy figure, not the exact litres.

Primer is 150–200 sq ft/L, 1 coat or 2

Onsiteteams: wall primer covers 150–200 sq ft/L, midpoint 175, with a 5% allowance — 1 coat for a repaint, 1–2 coats for new walls. That gives about 6 litres per 1,000 sq ft for one coat and 12 litres for two, matching onsiteteams' own 5–7 and 11–13 litre ranges. But aapkapainter prints 80–100 sq ft/L for primer and dailytools 6–8 sq m/L (65–86 sq ft/L) — much lower. This calculator uses onsiteteams' 175 and says so; on rough new plaster, expect more primer.

Putty is 1.2 kg/m² for 2 coats, fresh plaster only

Bttotek: 100 sq m of new plaster takes 120 kg of putty for 2 coats — 1.2 kg/m² in total. A repaint in good condition needs no putty, so the calculator shows 0 kg there. But onsiteteams and aapkapainter print far less — 2–2.5 kg per 100 sq ft (about 0.22 kg/m²) — roughly a fifth of bttotek's figure. This calculator follows bttotek, the conservative trade figure, and states the gap. The brief's first draft of the putty formula double-counted (area × 2 × 1.2 would give 240 kg for 100 sq m); the shipped formula is area × 1.2, which reproduces bttotek's 120 kg exactly.

Cost comes only from your own prices

Paint is priced by brand, shade, city and month — aapkapainter's own price table runs from ₹180 to ₹450 a litre across products — so no per-litre price is printed here as fact. Enter the price on the tin or the shop's quote and the calculator multiplies it by the buy litres (and the primer and putty rates, if entered). Leave the prices blank and there is no cost line at all.

Common paint calculation mistakes to avoid

AREA
Estimating from the floor area — A 12 × 14 ft room is 168 sq ft of floor but 520 sq ft of wall at a 10 ft ceiling. Paint covers walls, not floors — work from the perimeter × height, or the answer will be a third of what you need.
COVERAGE
Using the tin's theoretical coverage — The tin's figure is for a smooth, primed surface. Aapkapainter applies an 80% efficiency factor for normal Indian walls — Royale's 140–160 becomes 110–130 in practice. Using the theoretical figure under-buys by about a fifth.
COATS
Counting one coat when the job needs two — One coat is a touch-up over the same colour. A fresh finish over primer needs 2 coats, and a dark-to-light colour change needs 3. The sample room takes 3.35 litres for 1 coat and 6.70 for 2 — half the paint is not half the job.
OPENINGS
Forgetting the doors and windows — or measuring none of them — Two doors and two windows are 68 sq ft — about a litre of paint at premium coverage. Deduct them at 21 and 13 sq ft, and measure any large door or picture window instead of using the standard size.
PRICE
Trusting a printed per-litre price — Prices in guides go stale within months and vary by city. This page prints no paint price as fact — enter the price from the tin or the shop, and re-check it on the day you buy.

Before you trust the result

  • Is the room measured in feet — length, width and ceiling height — with a tape, not a guess?
  • Are the doors and windows counted, with large openings measured instead of using 21 and 13 sq ft?
  • Is the ceiling ticked only if you are painting it — and unticked if the ceiling stays as it is?
  • Is the paint type the one on the tin — and is the coverage band, not a single number, what you are relying on?
  • Are the coats right — 1 for a touch-up, 2 as standard, 3 for a dark-to-light change?
  • Is the surface right — fresh plaster takes 2 coats of primer and putty, a repaint takes 1 coat of primer and no putty?
  • Are the prices your own — from the tin or the shop — and not a figure from a guide?
  • Are you buying the buy figure (7.5 litres on the sample), not the exact litres (6.70)?
  • Do you remember this is a planning estimate — rough walls, porosity and the colour change all move the real figure?

Paint calculator FAQs

How do I calculate how much paint I need for a room?
Measure the wall area — 2 × (length + width) × ceiling height — subtract 21 sq ft per door and 13 sq ft per window, divide by the paint's coverage per litre and multiply by the number of coats, then add 10% for wastage. On the sample — a 12 × 14 ft room, 10 ft ceiling, 2 doors and 2 windows, premium emulsion, 2 coats — that is 520 − 68 = 452 sq ft, 452 × 2 ÷ 135 = 6.70 litres exact, 7.37 with wastage, buy 7.5 litres (two 4-litre tins).
How many litres of paint do I need for a 12 × 14 ft bedroom?
For 2 coats of premium emulsion at the 135 midpoint: 6.70 litres exact, 7.5 litres to buy. At economy coverage (115 midpoint) it is 7.86 litres exact, 9 litres to buy; at luxury (155) it is 5.83 exact, 6.5 to buy. The ceiling is not included — tick it to add 168 sq ft, which takes the premium figure to 9.19 exact and 10.5 to buy.
How much paint is needed for a 2 BHK flat?
About 26.7 litres for two coats at 120 sq ft/L on aapkapainter's figures — a 700 sq ft flat has about 1,600 sq ft of net wall area. A 3 BHK (1,000 sq ft, about 2,200 sq ft of wall) is about 36.7 litres. Those are whole-flat figures: run each room through the calculator and add the litres, because rooms differ in height and openings.
What is the coverage of paint per litre in India?
By band, for one coat: economy emulsion 110–120, premium 130–140, luxury/sheen 150–160, exterior 110–120 and texture 70–90 sq ft/L (onsiteteams). The calculator uses the midpoints — 115, 135, 155, 115 and 80. Aapkapainter's practical bands are lower (Royale 110–130, Tractor 105–120, Apex exterior 88–104), and dailytools prints economy at 9–10 sq m/L (97–108 sq ft/L) and premium at 11–13 sq m/L (118–140). There is no single true number — use the band, check the tin, and use the low end on rough walls.
How much primer do I need for painting walls?
Wall primer covers 150–200 sq ft/L by onsiteteams — this calculator uses the 175 midpoint with a 5% allowance, so about 6 litres per 1,000 sq ft for one coat and 12 litres for two. A repaint takes 1 coat; fresh plaster takes 2. On the sample (452 sq ft, repaint) that is 2.71 litres — buy 3.0 litres. But aapkapainter prints 80–100 sq ft/L and dailytools 6–8 sq m/L for primer, much lower — on rough new plaster, expect more primer than this figure.
How much wall putty is needed per square foot?
By bttotek, 1.2 kg per sq m in total for 2 coats — about 111.5 kg per 1,000 sq ft, or 120 kg for 100 sq m (three 40 kg bags). That is for fresh plaster; a repaint in good condition needs none, and this calculator shows 0 kg there. Onsiteteams and aapkapainter print far less (2–2.5 kg per 100 sq ft), roughly a fifth of bttotek's figure — the gap is stated on the page, and this calculator follows bttotek's conservative trade figure.
How do I calculate paint for a ceiling?
Ceiling area equals floor area: length × width. A 12 × 14 ft ceiling is 168 sq ft — at economy coverage for two coats that is 2.92 litres exact, buy 3.5 litres. Aapkapainter's own ceiling example is the same room at 130 sq ft/L for one coat: 168 ÷ 130 = 1.3 litres (2.6 for two coats). Use the calculator's “Ceiling only” scope for a ceiling on its own.
How many coats of paint should I plan for?
Two coats is the standard for a fresh finish over primer. One coat is enough for a touch-up in the same colour. Three coats are needed for a dark-to-light colour change or over stained and damaged walls. Fresh plaster also needs 2 coats of putty and 1–2 coats of primer before the finish coats.
Should I add wastage to my paint calculation?
Yes — always. This calculator adds 10% to the exact litres and rounds the buy figure up to the nearest 0.5 L, which covers roller absorption, brush edges and touch-ups. Dailytools and onsiteteams use the same 10% convention. On rough or textured walls, allow 15% instead.
Does the calculator include the cost of the paint?
Only from the prices you enter. There is no default price anywhere on the page, because paint prices change by brand, shade, city and month. Enter the per-litre price from the tin or the shop — for paint, primer and putty separately — and the calculator multiplies it by the buy litres or kg. Leave the prices blank and no cost line appears.

Methodology and honest limits

The rates on this page were checked against the calculators India actually uses, on 14 November 2026. All five were fetched in full: aapkapainter.com (worked examples, room table and coverage table), onsiteteams.com (working calculator, coverage table, primer and putty rates, worked example), calculatorking.in (working calculator in metres), bttotek.in (working calculator, worked example) and dailytools.in (working calculator, live result). Every worked example on the page reproduces its published figure exactly, except where a difference is stated: aapkapainter's room-table wall areas reproduce from the stated 21/13 sq ft deductions only for the small bedroom (360 − 60 = 300) and the hall (640 − 60 = 580) — the master bedroom's 420 sq ft (468 − 48) has no 21/13 combination, so the table's own wall areas are the source's figures and only its litres (area × 2 ÷ 120) are anchored; onsiteteams' worked example uses 12 sq ft per window (net 462, 6.6 litres, primer 2.77 litres) where this calculator uses 13 (net 459, 6.80 litres) and premium at its 135 midpoint rather than 140; onsiteteams' room table is approximate (marked ~) and its small-bedroom row implies no window deduction, so it is not anchored; the primer rate is onsiteteams' 150–200 (midpoint 175), where aapkapainter prints 80–100, bttotek 10–12 sq m/L (108–129 sq ft/L) and dailytools 6–8 sq m/L (65–86 sq ft/L); the putty rate is bttotek's 1.2 kg/m² for 2 coats, where onsiteteams and aapkapainter print 2–2.5 kg per 100 sq ft, roughly a fifth as much; and the putty formula in the first draft of this pack double-counted (area × 2 × 1.2 would give 240 kg for 100 sq m) — the shipped formula is area × 1.2, which reproduces bttotek's 120 kg exactly. This is a planning estimate, not a quotation: real use depends on wall roughness, porosity, colour change, application method and the tin's own stated rate; primer and putty figures are estimates; the cost comes only from the prices you enter; the ceiling is excluded unless you tick it; doors and windows use the standard 21/13 sq ft sizes — measure large openings. For related tools, the EMI Calculator works out the monthly cost of a loan, the Home Loan EMI Calculator covers a home loan, the SIP Calculator plans a monthly saving, the PPF Calculator and the FD Calculator plan the saving itself, the GST Calculator and the Percentage Calculator cover the arithmetic around a job, and the Income Tax Calculator covers the bigger money questions. Last updated 14 November 2026.

Last updated 14 November 2026.

Plan around the answer — the paint, the primer and the rest of your money

Try different figures or a different room — or run the same check with the related tools for your other plans.

WAM to GPA CalculatorGPA to WAM CalculatorSSC Age CalculatorCGPA to Percentage CalculatorAge CalculatorUPSC Age CalculatorIBPS Age CalculatorRRB Age CalculatorEMI CalculatorSIP CalculatorBMI CalculatorPercentage CalculatorGST CalculatorPPF CalculatorFD CalculatorIncome Tax CalculatorRD CalculatorHome Loan EMI CalculatorGratuity CalculatorHRA CalculatorCompound Interest CalculatorEPF CalculatorNPS CalculatorSSY CalculatorNSC CalculatorSCSS CalculatorPost Office MIS CalculatorKVP CalculatorPersonal Loan EMI CalculatorPost Office Time Deposit CalculatorCar Loan EMI CalculatorAPY CalculatorSWP CalculatorWashing Machine Capacity CalculatorMattress Size FinderLaptop Budget CheckerEvent Planning Budget EstimatorRetirement CalculatorStep-up SIP CalculatorHome Loan Eligibility CalculatorLumpsum CalculatorEducation Loan EMI CalculatorBike Loan EMI CalculatorGold Loan CalculatorCredit Card EMI CalculatorSalary CalculatorSimple Interest CalculatorCAGR CalculatorBMR CalculatorBody Fat CalculatorXIRR CalculatorTDS CalculatorRent vs Buy CalculatorPregnancy Due Date CalculatorOvulation Calculator — Fertile Window & Ovulation Date (India)Discount Calculator — Sale Price, Savings & GST (India)Date Calculator — Days Between Dates, Add Days & Countdown (India)Inflation Calculator — Future Cost, Value Today & CII (India)Stamp Duty Calculator — Property Registration Cost (India)Capital Gains Tax Calculator (India) — LTCG & STCG TaxFuel Cost Calculator (India)Share Average Calculator (India)Advance Tax Calculator (India)Brokerage Calculator (India)Leave Encashment Calculator (India)Rooftop Solar Calculator (India)Home Loan Prepayment Calculator (India)DA Calculator (India)Child Education Calculator (India)Sleep Calculator (India)Home Loan Tax Benefit CalculatorGold Price CalculatorAttendance CalculatorEmergency Fund CalculatorSilver Price CalculatorAC Tonnage CalculatorHouse Construction Cost CalculatorElectricity Bill CalculatorTerm Insurance CalculatorHealth Insurance Premium CalculatorTiles CalculatorCar Insurance Premium CalculatorTwo-Wheeler Insurance Premium CalculatorPeriod CalculatorConcrete CalculatorProtein CalculatorBrick Calculator