Free plywood calculator

Plywood Calculator

Add up the panel area for each thickness, pick the sheet size and the wastage, and get the sheet count for 18 mm, 12 mm and 6 mm — plus the cost at the prices you enter. Everything runs in your browser; nothing you type is sent or saved.

✓ Free to use ✓ No signup ✓ Browser calculation
11 sheets for the sample (6 of 18 mm, 3 of 12 mm, 2 of 6 mm) On the sample: 144 sq ft of 18 mm, 64 of 12 mm, 32 of 6 mm, 8×4 sheets, 10% wastage — ₹40,200 at ₹4,500 / ₹3,200 / ₹1,800 a sheet
6 sheets by layout, 5 by area — the gap is real Sri Sri's 6×7 ft wardrobe needs 6 sheets of 18 mm when the panels are laid out, about 4.3 by area alone. This page states the gap, not just the number.
Checked 16 November 2026 Sri Sri Plywoods, Saburi Ply, eightbyfour, Greenply and NRTech Studio — see the methodology at the foot of the page

Sheet counts for furniture jobs only. This tool counts plywood sheets by thickness; it does not price the finished furniture, the laminate or the labour.

Work out how many plywood sheets you need

Every 18 mm panel — sides, top, bottom and shutters — added up (0–100,000 sq ft, or 0–10,000 m²).

Every 12 mm panel — shelves and drawer sides — added up.

Every 6 mm panel — the backs — added up.

1 m² = 10.7639 sq ft — the tool converts before it divides by the sheet area.

The size you are actually buying — measure the sheet; the trade size and the IS 303 nominal size differ by a few millimetres.

0–20%; 10% is the default (Greenply 5–10%, Saburi 10–15%).

Your dealer's quote for an 18 mm sheet. Leave blank for a sheet count without a cost.

Your dealer's quote for a 12 mm sheet.

Your dealer's quote for a 6 mm sheet.

The calculator runs entirely in your browser — nothing you type is sent or saved.

Sheets per thickness = ceil(panel area ÷ sheet area), then ceil(that × (1 + wastage ÷ 100)). Round up first, then add wastage, then round up again.

No price is fixed anywhere — the cost is the sheets × the price per sheet you enter. The area method undercounts against a cutting layout.

11 SHEETS · 6 OF 18 MM · 3 OF 12 MM · 2 OF 6 MM · ₹40,200

11 SHEETS · 6 OF 18 MM · 3 OF 12 MM · 2 OF 6 MM · ₹40,200

8×4 FT — 32 SQ FT · 10% WASTAGE · AREAS IN SQ FT

11 sheets, ₹40,200

11 sheets in all (6 of 18 mm, 3 of 12 mm, 2 of 6 mm) on 8×4 ft — 32 sq ft sheets with 10% wastage — about ₹40,200 at the prices you entered. 8×4 ft — 32 sq ft · 10% wastage · areas in sq ft

18 mm sheets
6
12 mm sheets
3
6 mm sheets
2
Total sheets
11
Total cost
₹40,200
Sheet size
8×4 ft — 32 sq ft
Wastage
10%

11 sheets, ₹40,200

11 sheets, ₹40,200. 11 sheets in all (6 of 18 mm, 3 of 12 mm, 2 of 6 mm) on 8×4 ft — 32 sq ft sheets with 10% wastage — about ₹40,200 at the prices you entered. Sheet size 8×4 ft — 32 sq ft, wastage 10%, areas in sq ft. The area method undercounts against a cutting layout — confirm with your carpenter's cutting list before you order.

6 of 18 mm · 3 of 12 mm · 2 of 6 mm · 8×4 ft — 32 sq ft · 10% wastage.

6 sheets of 18 mm (144.00 sq ft ÷ 32 = 4.5 → 5 base, + 10% wastage → 6); 3 of 12 mm (64.00 sq ft → 2 base → 3); 2 of 6 mm (32.00 sq ft → 1 base → 2) = 11 sheets in all, ₹40,200 at the prices entered.
Sheet size 8×4 ft — 32 sq ft, wastage 10%, areas in sq ft. The area method undercounts against a cutting layout — confirm with your carpenter's cutting list before you order.

A planning estimate, not a cutting list — confirm the final sheet count with your carpenter before you order.

  • 11 sheets in all (6 of 18 mm, 3 of 12 mm, 2 of 6 mm) on 8×4 ft — 32 sq ft sheets with 10% wastage — about ₹40,200 at the prices you entered.
  • 18 mm: 144 sq ft → 5 base sheets → 6 sheets with 10% wastage; 12 mm: 64 sq ft → 2 base sheets → 3 sheets with 10% wastage; 6 mm: 32 sq ft → 1 base sheet → 2 sheets with 10% wastage.
  • A planning estimate, not a cutting list: the area method undercounts against a layout plan — confirm the final sheet count with your carpenter before you order.

Figures as of 16 November 2026.

Recent calculations

No calculations yet — work one out above.

What does a plywood calculator do?

It turns panel areas into a sheet count: give the area for 18 mm, 12 mm and 6 mm, pick the sheet size and the wastage, and it returns the sheets for each thickness, the total and the cost at the prices you enter. On the sample — 144 sq ft of 18 mm, 64 of 12 mm, 32 of 6 mm, 8×4 sheets, 10% wastage — that is 6 + 3 + 2 = 11 sheets, ₹40,200 at ₹4,500 / ₹3,200 / ₹1,800 a sheet. This is a planning tool for furniture jobs: it never states a plywood price, and it never replaces a cutting layout. Where the published guides state a figure differently, this page prints both and says which it uses: the only differences are the area method against the layout method.

A planning estimate, not a cutting list. The area method undercounts against a layout plan — confirm the final sheet count with your carpenter before you order.

The sample: 144 / 64 / 32 sq ft — 11 sheets, ₹40,200

The sample is 144 sq ft of 18 mm, 64 sq ft of 12 mm and 32 sq ft of 6 mm, on 8×4 sheets with 10% wastage, at ₹4,500 / ₹3,200 / ₹1,800 a sheet — 6 + 3 + 2 = 11 sheets, ₹40,200.

ThicknessWorkingResult
18 mm — carcass and shutters144 sq ft ÷ 32 = 4.5 → 5 base, × 1.10 = 5.5 → 66 sheets — ₹27,000 at ₹4,500
12 mm — shelves and drawer sides64 sq ft ÷ 32 = 2 → 2 base, × 1.10 = 2.2 → 33 sheets — ₹9,600 at ₹3,200
6 mm — backs32 sq ft ÷ 32 = 1 → 1 base, × 1.10 = 1.1 → 22 sheets — ₹3,600 at ₹1,800
Total6 + 3 + 211 sheets — ₹40,200

The sample is 144 sq ft of 18 mm, 64 of 12 mm and 32 of 6 mm, on 8×4 sheets with 10% wastage — 6 + 3 + 2 = 11 sheets, ₹40,200 at ₹4,500 / ₹3,200 / ₹1,800 a sheet.

Try a preset

Twelve worked jobs, from eightbyfour's 180 sq ft example to a 3BHK whole-home at 201 sheets — tap one to load its figures into the calculator above.

How to use this plywood calculator

  1. Add up the panel area for each thickness. Measure every panel — sides, top, bottom, shelves, shutters and backs — and group the areas: 18 mm for the carcass and shutters, 12 mm for shelves and drawer sides, 6 mm for backs.
  2. Pick the sheet size and the unit. 8×4 ft (32 sq ft) is the default; pick 7×4, 6×4 or 6×3 if that is what you are buying. Enter areas in sq ft or m² — the tool converts m² at 10.7639 sq ft per m².
  3. Set the wastage and enter your prices. 10% is the default; 5–10% per Greenply, 10–15% per Saburi. Enter the per-sheet price your dealer quotes for each thickness, or leave it blank for a sheet count without a cost.
  4. Read the sheets per thickness and the total. The answer is the sheets for 18 mm, 12 mm and 6 mm, the total and the cost. Check the per-thickness counts — and remember the area method undercounts, so confirm against the carpenter's cutting list before you order.

The rules behind the answer

Seven rules, each one checkable against the sources. Nothing here is a guess — and where a source states a figure differently, the page says so.

RuleDetail
Count each thickness separately — never one lump area 18 mm is the carcass and shutter board, 12 mm the shelves and drawer sides, 6 mm the backs. The three thicknesses are different boards at different prices, so each gets its own area, its own sheet count and its own price.
Base sheets are the area divided by the sheet area, rounded up Base sheets = ceil(panel area ÷ sheet area). 144 sq ft of 18 mm on 8×4 sheets (32 sq ft) is 4.5, rounded up to 5 — because you cannot buy half a sheet. A tier with 0 area needs 0 sheets.
Wastage is added after rounding up, then rounded up again Sheets = ceil(base × (1 + wastage ÷ 100)). The wastage goes on after the first rounding up: 5 base sheets at 10% is 5.5, rounded up to 6. Adding wastage to the area first gives a smaller, wrong answer.
Areas in m² convert at 10.7639 sq ft per m² 1 m² = 10.7639 sq ft. Areas entered in m² are converted before they are divided by the sheet area: 10 m² of 18 mm is 107.64 sq ft, which is 4 base sheets on 8×4 and 5 with 10% wastage.
Sheet sizes are the trade sizes; IS 303 gives the nominal sizes The most common sheet is 8×4 ft (32 sq ft), sold as 2440×1220 mm. IS 303 lists nominal sizes of 2400×1200, 2100×1200, 2100×900, 1800×1200 and 1800×900 mm. Always measure the sheet you are buying — the trade size and the nominal size differ by a few millimetres.
The area method undercounts against a cutting layout Sri Sri's worked 6×7 ft wardrobe needs 6 sheets of 18 mm by layout but only about 4.3 sheets by area (5 after rounding up). Panels do not divide evenly into sheets, so the offcuts are wasted. The area method is a planning estimate — the cutting list is the final count.
No fixed prices — the cost is your dealer's quote, entered by you Plywood rates vary by brand, grade, city and dealer, so no price is fixed on this page. The cost is sheets × the price per sheet you enter for each thickness; leave a price blank and that tier shows a sheet count with no cost. Laminate, liner and edge-banding are counted separately.

Sheet counts, furniture costs and masonry quantities are three different jobs

This tool counts plywood sheets by thickness: give the panel area for 18 mm, 12 mm and 6 mm, pick the sheet size and the wastage, and it returns the sheets for each thickness, the total and the cost at the prices you enter. The answer is a sheet count for the furniture — plus whatever the sheets cost at your dealer's quote.

The Modular Kitchen Cost Calculator — queued, not yet live — prices the finished kitchen, including the carcass board, shutter finish, countertop and hardware, as a cost range. The Interior Design Cost Calculator — also queued — prices a whole home's interiors. Those tools answer what the job costs; this one answers how many plywood sheets the job needs. The Tiles Calculator, the Cement Calculator, the Sand Calculator, the Plaster Calculator, the Brick Calculator, the Steel Weight Calculator and the Concrete Calculator — all queued — work out masonry quantities, not sheet goods: a floor area in tiles, a volume of cement or sand, a weight of steel. Those tools are named in plain words here and will be linked once they are live; until then they are not linked.

So the tools answer different questions. If you need the plywood sheet count before you order — how many sheets of 18 mm, how many of 12 mm, how many of 6 mm — start here. If you need what the finished kitchen costs, the Modular Kitchen Cost Calculator is the tool for that; if you need the cement and sand for the walls, the masonry calculators are the tools for that.

Eleven jobs, eleven answers

Eleven worked examples — each one reproduced by this calculator, except where a difference is stated.

The sample: 144 / 64 / 32 sq ft — 11 sheets, ₹40,200

144 sq ft of 18 mm on 8×4 sheets is 4.5, rounded up to 5 base sheets, then 5 × 1.10 = 5.5, rounded up to 6 sheets. 64 sq ft of 12 mm gives 3 sheets and 32 sq ft of 6 mm gives 2 — 11 sheets in all. At ₹4,500, ₹3,200 and ₹1,800 a sheet that is ₹27,000 + ₹9,600 + ₹3,600 = ₹40,200.

6 sheets of 18 mm (144.00 sq ft ÷ 32 = 4.5 → 5 base, + 10% wastage → 6), 3 sheets of 12 mm, 2 sheets of 6 mm — 11 sheets in all, ₹40,200 at the prices entered.

eightbyfour's 180 sq ft: 6 sheets, then 7 with 12% wastage

eightbyfour's worked example is a wardrobe with 180 sq ft of carcass and shutter surface: 180 ÷ 32 = 5.6, rounded up to 6 sheets before any wastage, then 6 × 1.12 = 6.72, rounded up to 7 sheets with a 12% allowance. This tool reproduces it exactly — 6 base sheets, 7 with wastage.

7 sheets of 18 mm (180.00 sq ft ÷ 32 = 5.6 → 6 base, + 12% wastage → 7), 0 sheets of 12 mm, 0 sheets of 6 mm — 7 sheets in all.

Greenply's rule: 100 sq ft — 4 sheets, then 5 with wastage

Greenply's rule is to divide the total area by 32 and always add 5–10% extra for cuts and wastage. 100 sq ft is 3.125 sheets, rounded up to 4, then 4 × 1.10 = 4.4, rounded up to 5 sheets at 10% wastage. This tool reproduces it exactly — and shows why the two roundings matter: adding 10% to the area first would give 4 sheets, one short.

5 sheets of 18 mm (100.00 sq ft ÷ 32 = 3.1 → 4 base, + 10% wastage → 5), 0 sheets of 12 mm, 0 sheets of 6 mm — 5 sheets in all.

Sri Sri's 6×7 ft wardrobe: 6 sheets by layout, 5 by area alone

Sri Sri Plywoods' worked 6×7 ft wardrobe needs 6 sheets of 18 mm and 2 of 6 mm when the panels are laid out on real 8×4 sheets — but the area alone suggests about 4.3 sheets of 18 mm, which is 5 after rounding up. The leftover strips (7 ft × 6 inches, and 1×4 ft ends) are too narrow for any panel in the design. With the default 10% wastage this tool also gives 6 sheets of 18 mm — but for a different reason — and 3 of 6 mm: 9 sheets in all. The page states the gap plainly: budget with the area method, order from the cutting list.

6 sheets of 18 mm (137.60 sq ft ÷ 32 = 4.3 → 5 base, + 10% wastage → 6), 0 sheets of 12 mm, 3 sheets of 6 mm — 9 sheets in all.

A modular kitchen: 38 sheets — inside Saburi's 30–45

Saburi's buying guide puts a modular kitchen at 30–45 sheets of 18 mm plywood (plus 20–30 sheets of chipboard for the carcase). This preset — 640 sq ft of 18 mm, 320 of 12 mm and 128 of 6 mm on 8×4 sheets with 10% wastage — gives 22 + 11 + 5 = 38 sheets in all, inside Saburi's range. The 18 mm count alone is 22 sheets; the rest is the shelves, drawer sides and backs the range does not count.

22 sheets of 18 mm (640.00 sq ft ÷ 32 = 20.0 → 20 base, + 10% wastage → 22), 11 sheets of 12 mm, 5 sheets of 6 mm — 38 sheets in all.

An 8×8 ft wardrobe: 21 sheets — inside Saburi's 20–30

Saburi puts an 8 ft × 8 ft wardrobe at 20–30 sheets of 18 mm. This preset — 320 sq ft of 18 mm, 160 of 12 mm and 96 of 6 mm on 8×4 sheets with 10% wastage — gives 11 + 6 + 4 = 21 sheets in all, inside the range. The 18 mm count is 11 sheets; a wardrobe this size also needs the shelves and backs the headline range leaves out.

11 sheets of 18 mm (320.00 sq ft ÷ 32 = 10.0 → 10 base, + 10% wastage → 11), 6 sheets of 12 mm, 4 sheets of 6 mm — 21 sheets in all.

A 3BHK whole-home: 201 sheets — inside Saburi's 200–300

Saburi puts a full 3BHK (1,200–1,500 sq ft whole-home, all panel types) at 200–300 sheets. This preset — 3,264 sq ft of 18 mm, 1,600 of 12 mm and 960 of 6 mm on 8×4 sheets with 10% wastage — gives 113 + 55 + 33 = 201 sheets, just inside the bottom of the range. The 12 mm count is exactly 55 sheets: 50 base sheets × 1.10 is 55.0, and the tool's 1e-9 epsilon keeps the floating-point 55.00000000000001 from rounding up to 56.

113 sheets of 18 mm (3264.00 sq ft ÷ 32 = 102.0 → 102 base, + 10% wastage → 113), 55 sheets of 12 mm, 33 sheets of 6 mm — 201 sheets in all.

Areas in m²: 10 / 5 / 2 m² — 10 sheets

Areas measured in square metres convert at 1 m² = 10.7639 sq ft. 10 m² of 18 mm is 107.64 sq ft — 3.37 sheets, rounded up to 4 base sheets, then 4 × 1.10 = 4.4, rounded up to 5. 5 m² of 12 mm gives 3 sheets and 2 m² of 6 mm gives 2 — 10 sheets in all. The conversion is exact, not an approximation, so a drawing in metres and a drawing in feet give the same answer.

5 sheets of 18 mm (107.64 sq ft ÷ 32 = 3.4 → 4 base, + 10% wastage → 5), 3 sheets of 12 mm, 2 sheets of 6 mm — 10 sheets in all.

No wastage: 180 sq ft — 6 sheets, and one shortfall waiting

With wastage set to 0%, the tool gives the bare sheet count: 180 sq ft on 8×4 sheets is 5.625, rounded up to 6 sheets. That is the number before cutting losses — useful to see, dangerous to order by. At the default 10% the same job needs 7 sheets, and at eightbyfour's 12% it also needs 7. Order the bare count and the last panel has no board left.

6 sheets of 18 mm (180.00 sq ft ÷ 32 = 5.6 → 6 base, + 0% wastage → 6), 0 sheets of 12 mm, 0 sheets of 6 mm — 6 sheets in all.

Cost on 6×3 sheets: 13 sheets, ₹44,600

Smaller sheets change the count fast. On 6×3 sheets (18 sq ft of face), 96 sq ft of 18 mm is 5.33, rounded up to 6 base sheets, then 6 × 1.10 = 6.6, rounded up to 7 — against 4 sheets on 8×4 with the same wastage. The whole job is 7 + 4 + 2 = 13 sheets, and at ₹4,200, ₹3,000 and ₹1,600 a sheet that is ₹29,400 + ₹12,000 + ₹3,200 = ₹44,600. The prices are the visitor's entries, not the tool's.

7 sheets of 18 mm (96.00 sq ft ÷ 18 = 5.3 → 6 base, + 10% wastage → 7), 4 sheets of 12 mm, 2 sheets of 6 mm — 13 sheets in all, ₹44,600 at the prices entered.

Area method vs cut-sheet plan: the TV unit on 7×4 sheets

NRTech Studio's cut-sheet calculator does what the area method cannot: it takes a stock sheet size, a saw kerf and a parts list of up to 12 part types, and lays every part out on real sheets with coordinates you can verify by hand. This TV unit — 96 sq ft of 18 mm, 32 of 12 mm and 16 of 6 mm on 7×4 sheets (28 sq ft) with 10% wastage — gives 5 + 3 + 2 = 10 sheets by area. A cut-sheet plan may give 11 or 12, because a 7 ft panel and a 4 ft offcut do not share a sheet. Use this page to budget, the cut-sheet planner to order.

5 sheets of 18 mm (96.00 sq ft ÷ 28 = 3.4 → 4 base, + 10% wastage → 5), 3 sheets of 12 mm, 2 sheets of 6 mm — 10 sheets in all.

Every figure on the sample, and how it is worked out

Each figure on the sample — 144 sq ft of 18 mm, 64 of 12 mm, 32 of 6 mm, 8×4 sheets, 10% wastage, ₹4,500 / ₹3,200 / ₹1,800 a sheet — with the rule behind it. The figure that surprises people is the rounding: 4.5 sheets becomes 5 before wastage, and 5.5 becomes 6 after it.

FigureHow it is worked outTypicalOn the sample
18 mm panel area The area you give Carcass and shutters 144 sq ft
12 mm panel area The area you give Shelves and drawer sides 64 sq ft
6 mm panel area The area you give Backs 32 sq ft
Sheet size The size you pick Measure the sheet you buy 8×4 ft — 32 sq ft
Wastage The percentage you give 0–20%; 5–10% per Greenply 10%
18 mm sheets 144 ÷ 32 = 4.5 → 5, then × 1.10 = 5.5 → 6 Rounded up twice 6 sheets
12 mm sheets 64 ÷ 32 = 2 → 2, then × 1.10 = 2.2 → 3 Rounded up twice 3 sheets
6 mm sheets 32 ÷ 32 = 1 → 1, then × 1.10 = 1.1 → 2 Rounded up twice 2 sheets
Total sheets 6 + 3 + 2 Across the three tiers 11 sheets
Total cost 6 × ₹4,500 + 3 × ₹3,200 + 2 × ₹1,800 Your prices, never the tool's ₹40,200

Plywood sheet sizes in India — IS 303 nominal sizes

Plywood sheet sizes in India, from Sri Sri Plywoods' sheet-size table and the IS 303 nominal sizes. The calculator offers the four trade sizes — 8×4, 7×4, 6×4 and 6×3 — and the 7×3 size is listed for reference.

FigureNoteSourceTypical
8×4 ft — 2440×1220 mm (trade size) Most common; the default in this tool Sri Sri Plywoods sheet-size table 32 sq ft
7×4 ft — 2100×1200 mm IS 303 nominal size 2100×1200 Sri Sri Plywoods sheet-size table 28 sq ft
7×3 ft — 2100×900 mm IS 303 nominal size 2100×900; listed for reference Sri Sri Plywoods sheet-size table 21 sq ft
6×4 ft — 1800×1200 mm IS 303 nominal size 1800×1200 Sri Sri Plywoods sheet-size table 24 sq ft
6×3 ft — 1800×900 mm IS 303 nominal size 1800×900 Sri Sri Plywoods sheet-size table 18 sq ft

Common plywood quantity mistakes to avoid

THICKNESS
Adding all the thicknesses into one lump area — 18 mm, 12 mm and 6 mm are different boards at different prices. A lump total of 240 sq ft says 8 sheets — but split properly it is 6 of 18 mm, 3 of 12 mm and 2 of 6 mm, and the 18 mm is the one you will run short of. Count each thickness separately.
WASTAGE
Forgetting the wastage — or adding it before rounding up — 100 sq ft on 8×4 sheets is 3.125 sheets: 4 after rounding up, then 4 × 1.10 = 4.4 → 5 with 10% wastage. Adding 10% to the area first (110 ÷ 32 = 3.44 → 4) gives 4 — one sheet short. Round up first, then add wastage, then round up again.
SHEET SIZE
Dividing by 32 when the sheets are 6×3 — A 6×3 sheet has 18 sq ft of face, not 32. 96 sq ft needs 3 sheets on 8×4 but 6 on 6×3 (7 with 10% wastage). Pick the size you are actually buying — the tool offers 8×4, 7×4, 6×4 and 6×3.
BACKS
Forgetting the 6 mm backs — Backs are easy to leave out of the area, and a wardrobe back is 21 sq ft on a 6×7 ft unit — a full sheet of 6 mm once wastage is in. Sri Sri's wardrobe needs 2 sheets of 6 mm, and the area method gives the same 2 only if the backs are counted.
LAYOUT
Treating the area answer as the cutting list — The area method undercounts: Sri Sri's 6×7 ft wardrobe needs 6 sheets of 18 mm by layout and 5 by area alone. Panels do not divide evenly into sheets, and the offcuts are wasted. Budget with this tool, order from the carpenter's cutting list.
PRICE
Pricing from a remembered rate — Plywood rates vary by brand, grade, city and dealer, and a remembered price is wrong within weeks. This tool states no price at all: enter your dealer's current per-sheet quote for each thickness, or leave it blank for the sheet count only.
FINISH
Counting laminate as plywood — A shutter needs a plywood sheet and a laminate sheet — different boards, different prices. Laminate, liner and edge-banding are counted separately; folding them into the plywood count overstates the sheets and understates the finishes.

Before you order the plywood

  • Is the 18 mm area right — 144 sq ft on the sample — and does it cover every carcass panel and shutter, not just the visible front?
  • Is the 12 mm area right — 64 sq ft on the sample — for the shelves and drawer sides?
  • Is the 6 mm area right — 32 sq ft on the sample — for the backs?
  • Is the sheet size right — 8×4 ft (32 sq ft) on the sample — and did you measure the sheet you are actually buying?
  • Is the wastage right — 10% on the sample — and is 10% enough for a job with many small panels?
  • Did you enter a price per sheet — ₹4,500 / ₹3,200 / ₹1,800 on the sample — or leave it blank for a sheet count without a cost?
  • Does the sheet count read right — 6 + 3 + 2 = 11 sheets on the sample — with the wastage already in it?
  • Did you remember the area method undercounts — Sri Sri's 6×7 ft wardrobe needs 6 sheets of 18 mm by layout, 5 by area alone?
  • Did you count laminate, liner and edge-banding separately — they are not plywood sheets?
  • Did you treat the answer as a planning estimate — and confirm the final count with your carpenter's cutting list before you order?

Plywood calculator FAQs

How many plywood sheets do I need?
Add up the panel area for each thickness, divide by the sheet area, round up, then add wastage and round up again. On the sample — 144 sq ft of 18 mm on 8×4 sheets (32 sq ft) with 10% wastage — that is 144 ÷ 32 = 4.5, rounded up to 5, then 5 × 1.10 = 5.5, rounded up to 6 sheets of 18 mm. Do the same for 12 mm and 6 mm and add the three counts: 6 + 3 + 2 = 11 sheets.
What is the formula for plywood sheets?
Sheets per thickness = ceil(panel area ÷ sheet area), then ceil(that × (1 + wastage ÷ 100)). The first rounding up is because you cannot buy part of a sheet; the second is because cutting wastes board. With 10% wastage the two roundings are separate: 100 sq ft on 8×4 sheets is 3.125 → 4 base sheets, then 4 × 1.10 = 4.4 → 5 sheets — Greenply's own worked rule.
How much wastage should I add for plywood?
Greenply says 5–10% extra for cuts and wastage; Saburi says 10–15%. This tool defaults to 10% and lets you pick 0–20%. Use 10% for a straightforward wardrobe or kitchen, 15% where panels are small or the layout is awkward, and 0% only to see the bare sheet count before wastage — never to order by.
What size is a plywood sheet in India?
The most common sheet is 8×4 ft, sold as 2440×1220 mm, which gives 32 sq ft of face. Smaller sizes are 7×4 ft (28 sq ft), 7×3 ft (21 sq ft), 6×4 ft (24 sq ft) and 6×3 ft (18 sq ft). IS 303, the Bureau of Indian Standards specification for general-purpose plywood, lists nominal sizes of 2400×1200, 2100×1200, 2100×900, 1800×1200 and 1800×900 mm. Always measure the sheet you are buying — the trade size and the nominal size differ by a few millimetres.
Why does this calculator give fewer sheets than my carpenter?
Because the area method divides total area by 32 and rounds up, while a carpenter lays each panel on real sheets — and panels rarely divide evenly into 8×4. Sri Sri Plywoods' worked 6×7 ft wardrobe needs 6 sheets of 18 mm by layout but only about 4.3 sheets by area (5 after rounding up). The leftover strips are too narrow to use. This tool states that gap on the page: use it to plan, and order from your carpenter's cutting list.
Which thickness of plywood goes where?
18 mm for the carcass and the shutters — the load-bearing panels. 12 mm for shelves and drawer sides. 6 mm for backs. That is the split this tool asks for, and it matches how Sri Sri and Saburi break a job down. A 6 mm back is never a substitute for an 18 mm carcass panel, and counting all three thicknesses as one lump total hides the shortfall on the thick board.
How much does plywood cost per sheet?
This tool does not state a price — plywood rates vary by brand, grade (MR, BWR, BWP), city and dealer, and a printed price would be wrong within weeks. Enter the per-sheet price your dealer quotes for each thickness and the tool works out the cost: on the sample, 6 sheets at ₹4,500, 3 at ₹3,200 and 2 at ₹1,800 come to ₹40,200. Leave the prices blank and you get the sheet count only.
Can I enter the area in square metres?
Yes. Pick m² and the tool converts with 1 m² = 10.7639 sq ft before it divides by the sheet area. 10 m² of 18 mm is 107.64 sq ft, which is 4 base sheets on 8×4 and 5 with 10% wastage. Measure in whichever unit your drawing uses — the conversion is exact, not an approximation.
Does the sheet count include laminate and edge-banding?
No. Laminate, liner and edge-banding are counted separately from the plywood — Sri Sri says so in its guide, and this tool follows it. A shutter needs one plywood sheet and one laminate sheet, and they are different purchases at different prices. The Modular Kitchen Cost Calculator on this site prices the finished kitchen, including finishes; this tool counts the plywood sheets only.
Is the answer the exact number of sheets to order?
No — it is a planning estimate. The area method undercounts against a cutting layout, and the exact count depends on the panel sizes, the grain direction and how the carpenter nests the cuts. NRTech Studio's cut-sheet calculator lays every part out on real sheets and is the right tool for the final count. Use this page to budget and to check a quote, then confirm the order against the cutting list.

Methodology and honest limits

The figures on this page were researched 16 November 2026 from plywood quantity guides and a cut-sheet tool: Sri Sri Plywoods' wardrobe guide (https://www.srisriplywoods.in/blog/how-many-plywood-sheets-do-i-need/), Saburi Ply's buying guide (https://www.saburiply.com/plywood-buying-guide/how-much-plywood), eightbyfour's estimating guide (https://www.eightbyfour.com/guides/estimating-plywood-laminate-quantities), Greenply's quantity guide (https://www.greenply.com/blogs/how-to-calculate-plywood-quantity-and-requirement-for-your-home) and NRTech Studio's cut-sheet calculator (https://www.nrtechstudio.com/tools/cut-sheet-calculator/). Sheet sizes are the trade sizes in Sri Sri's sheet-size table (8×4 ft = 32 sq ft, 7×4 = 28, 7×3 = 21, 6×4 = 24, 6×3 = 18), and the IS 303 nominal sizes (2400×1200, 2100×1200, 2100×900, 1800×1200, 1800×900 mm) are the Bureau of Indian Standards sizes for general-purpose plywood. The formula is eightbyfour's and Greenply's: base sheets = ceil(panel area ÷ sheet area), then sheets = ceil(base × (1 + wastage ÷ 100)). eightbyfour's worked example (180 sq ft, 8×4, 12% wastage) gives 6 base sheets then 7 — exact in this tool. Greenply's rule (area ÷ 32, +5–10% wastage) gives 4 base sheets then 5 at 10% for 100 sq ft — exact in this tool. Sri Sri's worked 6×7 ft wardrobe needs 6 sheets of 18 mm and 2 of 6 mm by layout, against about 4.3 sheets (5 after rounding up) and 2 by area alone — a documented difference, because panels do not divide evenly into sheets and the leftover strips are too narrow to use; with the default 10% wastage this tool also gives 6 sheets of 18 mm, but for a different reason, and the page says so. Saburi's brand ranges are layout-based estimates: modular kitchen 30–45 sheets of 18 mm, 8×8 ft wardrobe 20–30, 6 ft wardrobe 15–20, 3BHK whole-home 200–300. This tool's area-method presets give 38, 21 and 201 for the first three — inside the ranges — but 9 sheets for the 6×7 ft wardrobe against Saburi's 15–20 for a 6 ft wardrobe: a documented difference, because the area method misses the offcuts a layout plan counts. NRTech Studio's cut-sheet calculator plans the actual layout — stock sheet size, saw kerf and a parts list of up to 12 part types — and is the right tool for the final count; this page is the planning estimate that comes before it. No price is fixed anywhere on this page: the ₹/sheet figures are the visitor's own entries (0 means not entered), and the sample prices (₹4,500 / ₹3,200 / ₹1,800) are the sample's inputs, not a rate card. Related tools on this site: EMI Calculator, SIP Calculator, PPF Calculator, FD Calculator, Income Tax Calculator, Percentage Calculator, GST Calculator, CGPA to Percentage Calculator, BMI Calculator and HRA Calculator. Last updated 16 November 2026.

The arithmetic on this page is exact: per thickness, area in sq ft = entered area (× 10.7639 when entered in m²); base sheets = ceil(area ÷ sheet area); sheets = ceil(base × (1 + wastage ÷ 100)); cost = sheets × the price per sheet you enter. Ceilings use a 1e-9 epsilon so a floating-point 55.00000000000001 from 50 × 1.10 does not round up to 56. Totals are the sums across the three tiers. Five figures were checked against the sources and are documented in sources.md: eightbyfour's 180 sq ft at 12% wastage gives 6 base sheets then 7 — exact; Greenply's 100 sq ft at 10% gives 4 base then 5 — exact; Sri Sri's 6×7 ft wardrobe needs 6 sheets of 18 mm by layout against 5 by area alone — a documented difference; Saburi's ranges give 38 sheets for the modular kitchen preset (range 30–45), 21 for the 8×8 ft wardrobe (20–30) and 201 for the 3BHK (200–300) — all inside — but 9 for the 6×7 ft wardrobe against Saburi's 15–20 for a 6 ft wardrobe — a documented difference. Validation: each area 0–100,000 sq ft (0–10,000 m²); sheet size one of 32, 28, 24 or 18 sq ft; unit sq ft or m²; wastage 0–20%; each price ₹0–1,00,000 (0 means not entered). Invalid inputs return null, never a result.

Honest limits: this is a planning estimate, not a cutting list. The area method undercounts against a cutting layout — Sri Sri's 6×7 ft wardrobe needs 6 sheets of 18 mm by layout and 5 by area alone — and the exact count depends on the panel sizes, the grain direction and how the carpenter nests the cuts. Saburi's ranges are layout-based brand estimates, not exact counts: the 6 ft wardrobe range (15–20 sheets) sits above this tool's 9-sheet area-method preset for the same job. No price is fixed anywhere on this page: the ₹/sheet figures are the amounts you enter, and the sample prices (₹4,500 / ₹3,200 / ₹1,800) are the sample's inputs, not a rate card. Laminate, liner and edge-banding are counted separately from the plywood. Nothing you type is uploaded or stored: the calculation runs in your browser.

Plan around the answer — the cost and the finishes

Try different figures or a different sheet size — or run the same check with the related tools for your other plans.